The Fuji T-Series™ Spray Gun features an exclusive side-mounted Pattern Control Knob to adjust the size of the fan. This knob allows you to switch from small to large pattern or anywhere in between. Simply turn the knob counter-clockwise for a smaller pattern and clockwise for larger. This method provides full incremental adjustment of the fan size.
All Fuji T-Series™ Spray Guns are Non-Bleed. This means that air passes through the spray gun only when the trigger is pulled. All newer Fuji Turbines are designed and built with a bleed-off inside the turbine to allow use of any Non-Bleed spray gun.
The benefits of Non-Bleed include…
Less blowing around of shop dust and negligible turbulence in the spray area.
Less paint buildup on the tip of the Fluid Nozzle.
Spray gun noise (hiss of air) appears to be lessened, because now the hiss of air is intermittent.
- 1.3mm Aircap set
- Center mounted 600cc gravity cup or 1 Qt. bottom feed cup
- Stay-cool nylon handle (fitted over a metal tube)
- Metal fluid knob and collar
- Rear rotating nipple for pressure tubes – makes for easier adjustment especially for those who are left handed.
If you want to spray upwards with the T70 you need to change the
configuration as follows:
Loosen the nut holding the cup assembly to the gun.
Rotate the cup assembly 90 degrees so that the bent part of the pickup
tube is facing the handle of the spray gun, also the pressure tube
nipple on the cup assembly will will be facing forward.