Product Categories

Newsletter signup

Stay up to date with the latest resurfacing products and receive notifications about product specials and sale events!
Now In: U-POL → U-POL Dolphin Pourable Glaze (440mL)
  Login

U-POL Dolphin Pourable Glaze (440mL)



E-mail this product to a friend E-mail this product to a friend

Low Shipping Prices For U-POL Dolphin Pourable Glaze (440mL)
U-POL Dolphin Pour Glaze (440mL)


U-POL Dolphin Pour Glaze (440mL)


Dolphin Glaze polyester filler is a two component multifunctional chemical liquid used for final skimming of a polyester putty repair or for direct application onto minor imperfections on bodywork prior to over painting. Dolphin Glaze has been specially formulated for the professional user and combines excellent leveling properties together with easy sanding.

Surface preparation and instructions for use:

Dolphin Glaze polyester filler can be used on the following surfaces:

- Bare metal – e.g. Steel, degrease and abrade with P80 paper.
- Aluminium and Zinc coated substrates – degrease and abrade with P120 paper. Do not apply over etch  primer.
- Original paint surfaces (with the exception of thermoplastic acrylics) degrease and abrade with 180 grit paper. Degrease and abrade with  80 grit paper.

Mixing Ratio: 100 parts by weight Dolphin Glaze polyester filler, 2 parts by weight U-POL hardener for polyester filler. The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Dolphin Glaze is a thick liquid and should be mixed in small quantities on a flat non-porous surface.To obtain optimum results apply the mixed liquid in small quantities to for a thin film – during cure, surface imperfections will flow out to leave a level repair which requires only a small amount of sanding. Do not greatly over catalyze the paste as this will not significantly speed up the gel time and could lead to bleed through and bleaching problems when over-painting later. Staining may also occur where too little hardener is used.

Pot life Once mixed, 4 -5 mins. at 20ºC with 2% hardener.

Tools Mixing board, filler knife, plastic or rubber spatula

Drying Time Sandable after 30 mins. at 20ºC.

Dolphin Glaze polyester putty can be over-painted with most paint systems includig 2K. Ideally a full system is recommended including primer.

400 mL


Price: $11.80 
Quantity: