Coating Restoration & Repair Kit

Use Micro-Blend 1800 by hand to remove sags or runs. Always sand in a straight line pattern making certain to completely cover the entire area being restored. If Micro-Blend 1800 is not aggressive enough, go to Micro-Blend 1500, followed by Micro-Blend 1800. Be careful not to sand through the coating. With a slow 750-1000 rpm right angle polisher, polish the sanded area using a dime-size amount of Micro-Buff and a lambs wool polishing pad. Wipe any residual Micro-Buff off with a soft, cotton cloth.

Urethane Catalyzed Paint - Removing Damage from Uncured

Using a mist of water on the Micro-Blend and using very light pressure, begin with Micro-Blend 3600 to remove defects, followed by 4000, 8000 and 12000 by hand. To polish, hand rub using Micro-Buff and a soft flannel cloth.

For any of the above procedures:

Rinse out the lambs wool polishing pad and Micro-Blend abrasives in mild detergent, dry and store for future use.

Kit contains:
1-3" x 6" Sheet 1500 MICRO-BLEND

1-3" x 6" Sheet 1800 MICRO-BLEND

1-3" x 6" Sheet 2400 MICRO-BLEND
1-3" x 6" Sheet 3200 MICRO-BLEND
1-3" x 6" Sheet 3600 MICRO-BLEND
1-3" x 6" Sheet 4000 MICRO-BLEND
1-3" x 6" Sheet 6000 MICRO-BLEND

1-3" x 6" Sheet 8000 MICRO-BLEND
1-3" x 6" Sheet 12000 MICRO-BLEND
1-3" x 3" Foam Sanding Block
1-2 oz. Bottle Micro-Gloss
1-1 oz. Bottle Anti-Static Cream
1-3" x 3" Cardboard
2-Flannel Cloths
1-2 oz. Bottle Detergent
1-Instructions